American Rotary AMP 10 Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Transformator American Rotary AMP 10. American Rotary AMP 10 18 stron.

WARNING + SAFETY INFORMATION

DANGER: HIGH VOLTAGE

DANGER: RISK OF ELECTRIC SHOCK

This manual is to serve the purpose of providing recommendations for proper performance but is not to

supersede or replace local or national electric codes . Installation should be done by a licensed electrician who is

familiar with phase converter installations .

WARNING! READ BEFORE STARTING CONVERTER!

If this phase converter does not start in less than 2 seconds, TURN IT OFF and verify the following listed below .

1 . This manual covers the installation and proper

wiring for 208-240v

208-240v only . If you have 480v or any

other voltage than listed above, incoming power

do not install this unit and call American Rotary .

2 . Make sure the wire size meets or exceeds our

minimum recommended size .

3 . All loads, INCLUDING TRANSFORMERS, must

be DISCONNECTED before starting the phase

converter each time . American Rotary offers

a variety of manual and automatic disconnect

options . Please visit AmericanRotary . c om or call

1-888-743-6832 for assistance .

If your converter still takes more than 2 seconds

to start, call our Toll-Free Technical support

line 1-888-743-6832 . You will be asked to verify

conditions 1 and 2 above are met . Failing to meet

these two conditions account for 99% of starting

problems and can result in damage to the

starting capacitors .

This converter is much quieter than an off the

shelf three phase motor . If for any reason it does

not sound like it is running smoothly, TURN IT

OFF and call American Rotary Technical support .

(Please note that there is a break-in period of 100

hours .)

3 | User Manual R2 .3

Electric shock could result in death or injury . Please consult qualified

personnel for installation .

Please wait 30 minutes before servicing .

4 . Make sure the Phase Converter Panel, the electric

generator/idler and your equipment is grounded!

5 . Before connecting the load, verify proper function

of phase converter . This will ensure the protection

of the phase converter and your equipment .