Bobike maxi City Instrukcje użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Instrukcje użytkownika dla Akcesoria rowerowe Bobike maxi City. Bobike maxi City 9 stron. Bicycle seat
Również dla Bobike maxi City: Instrukcje użytkownika (7 strony)

Drukuj stronę

2., 3. and 4. Mounting the bearing bracket

Place the bearing bracket under the seat (2). To mount

the bearing bracket (J), open the storage compartment

(3). Ensure that the bolt holes align with the nuts in the

bracket. Insert the nuts into the holes and hand-tighten

them (4).

5. and 6. Attaching the mounting bracket to your

bicycle

Attach the mounting bracket (L) to the saddle tube and

the upright rear fork of your bicycle. Open the locking

units (K) left and right of the bracket (5). Loosen the bolts,

and place the bracket on the frame. Hand-tighten the

bolts so that you can adjust the bracket. The middle section

of the bracket should be positioned horizontally (6).

7. Adjusting the height of the mounting bracket

The height of the mounting bracket is adjustable, so you

can adjust the distance (height) properly. The distance

between the upper surface of the luggage carrier and

the seat should be about 2 cm. If your bicycle has no

luggage carrier, maintain a distance of at least 8 cm

above the rear wheel. The mounting bracket must be in

the same position on both sides. Tighten all bolts ﬁ rmly

(with a torque of 9 Nm).

8. Placing the seat onto the bicycle

Open the locking units (K) of the mounting bracket (1).

Insert the seat's bearing bracket into the openings in the

front (2) of the mounting bracket. Insert the bearing

bracket in the front openings of the mounting bracket.

Push the seat so far down that the bearing bracket on

the underside of the mounting bracket is visible. Close

the locking units. You should hear a deﬁ nite click.

9. The seat's centre of gravity

Check that the centre of gravity of the Bobike maxi City

or maxi Tour does not lie more than 10 cm behind the

rear axle. Carry out this check before you go on a ﬁ rst

test ride with your child. The symbol for the centre of

gravity ( ) can be found on the sides of the seat (A).

You can adjust the location of the centre of gravity by

partially loosening the bearing bracket's bolts in the

www.bobike.com

seat (see Point 4), so that the seat can be moved back

and forth over the bearing bracket. Once you have

found the proper position, tighten the bolts ﬁ rmly (with a

torque of 5 Nm).

Check that the surface of the seat is horizontal, and that

the back of the seat is tilted somewhat to the rear. This is

the case when the mounting bracket is in a horizontal

position. If this is not the case, you can adjust the position

of the Bobike maxi City or maxi Tour by readjusting the

mounting bracket (see Points 6 + 7).

10. Adjusting the safety belt

Sit your child in the Bobike maxi City or maxi Tour and

check that the chosen setting is correct. If you want to

change the setting, always remove your child from the

seat ﬁ rst. The unique safety belt system (C) of your Bobike

maxi City or maxi Tour ensures that your child will remain

seated safely in the seat. First pull out the safety belt

system in length as far as it will go. Place your child in

the seat. Insert the safety belt clips into the recesses

above your child's shoulders. Make sure that your child

can still move freely but safely in the seat. The safety

belt clips should be inserted, even if you go for a ride

without your child. This keeps loose parts from coming

into contact with the moving parts of the bicycle. You

can insert the safety belt clips into the seat or into the

spoke protectors.

11. Head support (maxi Tour only)

For the Bobike maxi Tour, make sure that the head

support is adjusted to the height of your child before

inserting the belt clips into the head support. You can

adjust the head support by squeezing the grey handle

(1) on the back whilst simultaneously moving the head

support (2) to the right height. Tighten the belt by pulling

on the ends. The Bobike maxi Tour is equipped with LED

lighting. To operate this, you will have to install 2 AAA

batteries yourself. The lighting can be turned on by

pressing the grey button.

12. Adjusting the height of the footrests

The Bobike maxi City and maxi Tour are equipped with

easily adjustable footrests (H). You can adjust the footrests

XX.