Bobike maxi City Инструкции пользователя - Страница 6
Просмотреть онлайн или скачать pdf Инструкции пользователя для Аксессуары для велосипедов Bobike maxi City. Bobike maxi City 9 страниц. Bicycle seat
Также для Bobike maxi City: Инструкции пользователя (7 страниц)
Печатать страницу
2., 3. and 4. Mounting the bearing bracket
Place the bearing bracket under the seat (2). To mount
the bearing bracket (J), open the storage compartment
(3). Ensure that the bolt holes align with the nuts in the
bracket. Insert the nuts into the holes and hand-tighten
them (4).
5. and 6. Attaching the mounting bracket to your
bicycle
Attach the mounting bracket (L) to the saddle tube and
the upright rear fork of your bicycle. Open the locking
units (K) left and right of the bracket (5). Loosen the bolts,
and place the bracket on the frame. Hand-tighten the
bolts so that you can adjust the bracket. The middle section
of the bracket should be positioned horizontally (6).
7. Adjusting the height of the mounting bracket
The height of the mounting bracket is adjustable, so you
can adjust the distance (height) properly. The distance
between the upper surface of the luggage carrier and
the seat should be about 2 cm. If your bicycle has no
luggage carrier, maintain a distance of at least 8 cm
above the rear wheel. The mounting bracket must be in
the same position on both sides. Tighten all bolts fi rmly
(with a torque of 9 Nm).
8. Placing the seat onto the bicycle
Open the locking units (K) of the mounting bracket (1).
Insert the seat's bearing bracket into the openings in the
front (2) of the mounting bracket. Insert the bearing
bracket in the front openings of the mounting bracket.
Push the seat so far down that the bearing bracket on
the underside of the mounting bracket is visible. Close
the locking units. You should hear a defi nite click.
9. The seat's centre of gravity
Check that the centre of gravity of the Bobike maxi City
or maxi Tour does not lie more than 10 cm behind the
rear axle. Carry out this check before you go on a fi rst
test ride with your child. The symbol for the centre of
gravity ( ) can be found on the sides of the seat (A).
You can adjust the location of the centre of gravity by
partially loosening the bearing bracket's bolts in the
www.bobike.com
www.bobike.com
seat (see Point 4), so that the seat can be moved back
and forth over the bearing bracket. Once you have
found the proper position, tighten the bolts fi rmly (with a
torque of 5 Nm).
Check that the surface of the seat is horizontal, and that
the back of the seat is tilted somewhat to the rear. This is
the case when the mounting bracket is in a horizontal
position. If this is not the case, you can adjust the position
of the Bobike maxi City or maxi Tour by readjusting the
mounting bracket (see Points 6 + 7).
10. Adjusting the safety belt
Sit your child in the Bobike maxi City or maxi Tour and
check that the chosen setting is correct. If you want to
change the setting, always remove your child from the
seat fi rst. The unique safety belt system (C) of your Bobike
maxi City or maxi Tour ensures that your child will remain
seated safely in the seat. First pull out the safety belt
system in length as far as it will go. Place your child in
the seat. Insert the safety belt clips into the recesses
above your child's shoulders. Make sure that your child
can still move freely but safely in the seat. The safety
belt clips should be inserted, even if you go for a ride
without your child. This keeps loose parts from coming
into contact with the moving parts of the bicycle. You
can insert the safety belt clips into the seat or into the
spoke protectors.
11. Head support (maxi Tour only)
For the Bobike maxi Tour, make sure that the head
support is adjusted to the height of your child before
inserting the belt clips into the head support. You can
adjust the head support by squeezing the grey handle
(1) on the back whilst simultaneously moving the head
support (2) to the right height. Tighten the belt by pulling
on the ends. The Bobike maxi Tour is equipped with LED
lighting. To operate this, you will have to install 2 AAA
batteries yourself. The lighting can be turned on by
pressing the grey button.
12. Adjusting the height of the footrests
The Bobike maxi City and maxi Tour are equipped with
easily adjustable footrests (H). You can adjust the footrests
XX.
7.