DAB FEKAFOS 550 Double Instrukcja instalacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla System wodny DAB FEKAFOS 550 Double. DAB FEKAFOS 550 Double 19 stron.

6. PUMP INSTALLATION

Not applicable for models Fekabox 200 – Fekafos 280 – Fekafos 550 which have the pump already fitted

inside.

Ensure that the difference in level between the pump and the sewage network is compatible

with the pump performance.

Fekabox 200 l: For references of the details see diagram on page 41

The Fekabox range is equipped with a 2" and 1"1/4 polypropylene lowering device with anti-rotation bracket,

and therefore intended for only one automatic single-phase pump with float ≤ 20Kg.

A. Remove the tank cover.

B. Extract the slide (3) from the coupling foot (5)

C. For FEKA 600: screw the special 2"F-1"1/4 M coupling (2.1), onto the lifting slide (3), and of the pump

(see fig. 7)

D. For FEKA VS-VX



the slide (3) onto the pump body (see fig. 7)



Remove the screw (1) from the pump body



Assemble the anti-rotation bracket (2) on the slide and then re-tighten the screw (1)



check that the length of the pump float is 250 mm (see page 41, fig 8A).

E. Reposition the slide/pump assembly on the foot (5) already fixed inside the tank.

Fig. 7

Feka VS-VX

ENGLISH

2.1

Feka 600