AMERITRON SDC-102 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kontroler AMERITRON SDC-102. AMERITRON SDC-102 13 stron. Screwdriver antenna controller

SDC-102 Screwdriver Controller with Memory

Introduction

The SDC-102 Screwdriver Controller provides manual operation for tuning

screwdriver antennas. In addition, tuned positions can be saved in one of the 10

presets so it can be recalled later. A 4-digit counter is used to display the current

antenna position. A sensor is required for the counter and automatic operation

to function properly. This controller is compatible with single and dual sensor

setups. If your antenna does not have a sensor installed, contact the antenna

manufacturer or Ameritron.

•

4-Digit Turns Display

•

10 Programmable Presets

•

Manual Up/Down Buttons

•

Current Sensor Trip for Antenna/Motor Protection

•

Auto-Park: Lowers antenna to lowest position and zeros counter

•

Powered From 12V Vehicle Supply

•

Power: Push button switch powers the controller on and off.

•

Up: Moves the screwdriver antenna up.

•

Down: Moves the screwdriver antenna down.

Buttons 1 – 5: Top bank of preset buttons.

•

Buttons 6 – 10: Bottom bank of preset buttons.

Instruction Manual