DoorHan PCB-SH380 Instrukcja programowania - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja programowania dla Panel sterowania DoorHan PCB-SH380. DoorHan PCB-SH380 8 stron.

ELECTRICAL CONNECTIONS

2. Motor (terminal block X4)

Connect the motor to terminals "U", "V" and "W".

380V motor: max. operating current < 9 A, wattage ≤ 4 kW.

3~Motor: 380V

3. Limit switches (terminal block X0)

Connect limit switch wires "OP" (opening switch), "CL" (closing switch) and "GND" (common wire).

Open

Common

4. 3-position control post or key-switch (terminal block X1 and X2)

Connect 3-position control post to the terminals "OPEN", "STOP", "CLOSE" and "GND".

Connect the key-switch to terminals "D" and "GND".

Key-switch

3-button control station

WARNING! If 3-position control post is not used, install a jumper between "STOP" and "GND".