DoorHan PCB-SH380 Programlama Talimatları Kılavuzu - Sayfa 6
Kontrol Paneli DoorHan PCB-SH380 için çevrimiçi göz atın veya pdf Programlama Talimatları Kılavuzu indirin. DoorHan PCB-SH380 8 sayfaları.
Sayfayı Yazdır
ELECTRICAL CONNECTIONS
2. Motor (terminal block X4)
Connect the motor to terminals "U", "V" and "W".
380V motor: max. operating current < 9 A, wattage ≤ 4 kW.
3~Motor: 380V
3. Limit switches (terminal block X0)
Connect limit switch wires "OP" (opening switch), "CL" (closing switch) and "GND" (common wire).
Close
Open
Common
4. 3-position control post or key-switch (terminal block X1 and X2)
Connect 3-position control post to the terminals "OPEN", "STOP", "CLOSE" and "GND".
Connect the key-switch to terminals "D" and "GND".
Key-switch
3-button control station
WARNING! If 3-position control post is not used, install a jumper between "STOP" and "GND".
6