Astralpool SLX Instrukcja instalacji i obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Oświetlenie podwodne Astralpool SLX. Astralpool SLX 6 stron. Underwater niche lights for fibreglass pools
Również dla Astralpool SLX: Szczegółowe instrukcje (6 strony), Skrócona instrukcja obsługi (4 strony), Instrukcja instalacji (7 strony), Instrukcje instalacji (4 strony)

3. Install a second conduit to return below ground level and away to the power supply. Both conduits

should be glued into a draw box to allow for future service.

Draw Box

Steel bars

4. Press the larger polystyrene foam insert (item 26938) into the niche's front opening. This temporary

insert will stop dirt, concrete and debris entering the niche and will maintain roundness of the niche

under the weight of the concrete. The foam insert must be a tight fit inside the niche.

5. Cover the entire niche surface with concrete in a uniform manner to ensure secure fixing. Ensure the

concrete covers the niche all around and at the back – air pockets and bubbles in the concrete must

be eliminated. Avoid creating thin sections of concrete to minimise the risks of cracking or leaks. It is

imperative the front edge of the niche does not stand proud of the concrete or sit recessed to the

concrete. Ensure there is at least 50mm of concrete behind the niche.

6. Smooth the concrete around the niche and make a recess around the rim of approximately 8mm, to

allow for installation of a waterproof seal.

Steel Bars

Scoop out concrete around

front edge of the niche and

apply waterproof sealant in

recess as depicted

If required, trim niche back

a few mm only to be in line

with concrete wall surface.

Flush mount is essential.

Inst.375 Astral Pool CONCRETEInstructions V10.15

Ensure that conduits are "broken" - even if a

junction box is not fitted - before returning

below water level. This will stop the water from

being siphoned from the pool or spa.

Conduit to Power

supply

Ensure concrete thickness of 50mm

minimum around niche

Conduit

Concrete thickness

50mm minimum