Canon PIXMA MP610 Series Instrukcja serwisowa - Strona 14
Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Wszystko w jednej drukarce Canon PIXMA MP610 Series. Canon PIXMA MP610 Series 45 stron. All-in-one photo inkjet printer
Również dla Canon PIXMA MP610 Series: Zacznij tutaj (2 strony), Podręcznik uzupełniający (6 strony), Broszura i specyfikacje (2 strony), Skrócona instrukcja obsługi (40 strony), Skrócona instrukcja obsługi (2 strony)
Drukuj stronę
- 1. Table of Contents
- 1. 1 Maintenance
- 1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer
- 1. Customer Maintenance
- 1. Special Tools
- 1. Serial Number Location
- 2. 2 List of Error Display / Indication
- 2. Operator Call Errors
- 2. Service Call Errors
- 2. Other Error Messages
- 2. Warnings
- 2. Troubleshooting by Symptom
- 3. 3 Repair
- 3. Notes on Service Part Replacement
- 3. Adjustment / Settings
- 3. Verification Items
MP610
3. REPAIR
3-1. Notes on Service Part Replacement (and Disassembling / Reassembling)
Service part
Logic board ass'y
Absorber kit
Carriage unit
Paper feed motor
Platen unit
PR lift shaft ass'y
Input carriage lift gear
Notes on replacement
- Before removal of the logic
board ass'y, remove the power
cord, and allow for approx. 1
minute (for discharge of
capacitor's accumulated
charges), to prevent damages to
the logic board ass'y.
- Before replacement, check the
ink absorber counter value (by
service test print or EEPROM
information print).
[See
3-4. Verification Items, (1)
Service test print
for details.]
- The red screws securing the
paper feed motor are allowed to
be loosened only for paper feed
motor replacement. (DO NOT
loosen them in any other cases.)
*1
Adjustment / settings
After replacement:
1. Initialize the EEPROM.
2. Set the ink absorber counter
value.
3. Set the destination in the
EEPROM.
4. Correct the CD / DVD and
automatic print head
alignment sensors.
5. Check the ink system
function.
6. Perform LF / Eject correction.
7. Perform button and LCD test.
[See
3-3. Adjustment /
Settings, (6) Service
for details of 1 to 7.]
8. Perform print head alignment
and LCD language setting in
the user mode.
After replacement:
1. Reset the ink absorber
counter.
[See
3-3. Adjustment /
Settings, (6) Service
for details.]
At replacement:
1. Apply grease to the sliding
portions.[See
3-3.
Adjustment / Settings, (3)
Grease
application.]
2. Check the ink system
function.
[See
3-3. Adjustment /
Settings, (6) Service
for details.]
3. Perform print head alignment
in the user mode.
At replacement:
1. Adjust the paper feed motor.
[See
3-3. Adjustment /
Settings, (1) Paper feed motor
adjustment, for details.]
After replacement:
1. Check the ink system
function.
2. Perform LF / Eject
correction.
[See
3-3. Adjustment /
Settings, (6) Service
for details.]
At replacement:
1. Apply grease to the sliding
portions.
12 / 43
TABLE OF CONTENTS
Operation check
- EEPROM information print
- Service test print
- Printing via USB connection
- Copying
- Direct printing from a digital
camera (PictBridge)
mode,
- Ink absorber counter volume
print
(After the ink absorber counter
is reset, the counter value is
mode,
printed automatically. )
- Service test print (Confirm
CD / DVD and automatic
print head alignment sensor
correction, and ink system
function.)
mode,
- Service test print
mode,
- Service test print