Canon PIXMA MX850 Instrukcja konfiguracji sieci - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja konfiguracji sieci dla Wszystko w jednej drukarce Canon PIXMA MX850. Canon PIXMA MX850 43 stron. Multifunction brochure
Również dla Canon PIXMA MX850: Podręcznik uzupełniający (6 strony), Instrukcje konfiguracji (2 strony), Broszura (2 strony)
Drukuj stronę
- 1. Setup Outline
- 2. Setting up the Machine and the Computer (Windows)
- 3. Preparing for Setup
- 4. Installing the Software
- 5. Setting up for Use over Wired Lan
- 6. Setting up the Machine and the Computer (Macintosh)
- 7. Cannot Connect to the Machine (the Machine Is Not Detected)
- 8. Setting up the Machine Again for Use over Network
2-2 Setting Up an Additional LAN-connected
Computer
Important
To set up an additional LAN-connected computer, the necessary software must be installed on the
additional computer. See "1 Preparing for Setup" on page 2 and "2 Installing the Software" on page 3 to
confirm that the software installation is complete, then proceed with the procedure below.
1
Make sure that the machine is connected to
the network device with a LAN cable, then
turn on the machine.
When you turn on the machine, the COPY button
flashes green, then remains lit.
Note
If MAC address filtering is configured to restrict
access to the machine, make sure beforehand to
register the address of the computer you are setting
up. To register the address, use the Canon IJ
Network Tool on the computer that has already been
set up.
Make sure that the computer you are setting up is
not connected to the machine with a USB cable.
This setup procedure does not involve connecting
the USB cable.
2
On the Setup Method screen, select Set up
only the computer for network use, then
click Next.
The machine connected to the network is detected
automatically.
Setting Up the Machine and the Computer (Windows)
(continued from step 9 on page 5)
11