Canon PIXMA MX850 네트워크 설정 매뉴얼 - 페이지 13
{카테고리_이름} Canon PIXMA MX850에 대한 네트워크 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX850 43 페이지. Multifunction brochure
Canon PIXMA MX850에 대해서도 마찬가지입니다: 보충 설명서 (6 페이지), 설정 지침 (2 페이지), 브로셔 (2 페이지)
페이지 인쇄
- 1. Setup Outline
- 2. Setting up the Machine and the Computer (Windows)
- 3. Preparing for Setup
- 4. Installing the Software
- 5. Setting up for Use over Wired Lan
- 6. Setting up the Machine and the Computer (Macintosh)
- 7. Cannot Connect to the Machine (the Machine Is Not Detected)
- 8. Setting up the Machine Again for Use over Network
2-2 Setting Up an Additional LAN-connected
Computer
Important
To set up an additional LAN-connected computer, the necessary software must be installed on the
additional computer. See "1 Preparing for Setup" on page 2 and "2 Installing the Software" on page 3 to
confirm that the software installation is complete, then proceed with the procedure below.
1
Make sure that the machine is connected to
the network device with a LAN cable, then
turn on the machine.
When you turn on the machine, the COPY button
flashes green, then remains lit.
Note
If MAC address filtering is configured to restrict
access to the machine, make sure beforehand to
register the address of the computer you are setting
up. To register the address, use the Canon IJ
Network Tool on the computer that has already been
set up.
Make sure that the computer you are setting up is
not connected to the machine with a USB cable.
This setup procedure does not involve connecting
the USB cable.
2
On the Setup Method screen, select Set up
only the computer for network use, then
click Next.
The machine connected to the network is detected
automatically.
Setting Up the Machine and the Computer (Windows)
(continued from step 9 on page 5)
11