Canon Microfilm Scanner 500 Instrukcja obsługi - Strona 24

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Skaner Canon Microfilm Scanner 500. Canon Microfilm Scanner 500 48 stron.

OPERATING PROCEDURES

■ Manual adjustment

Make sure that the lamp above the AE key is off. (If necessary,

press the AE key so that the lamp goes off.) Then adjust the den-

sity by pressing the appropriate Print Density Adjustment key (right

arrow or left arrow) on the keyboard or operation panel. The Print

Density display changes accordingly, with rightward movement

indicating higher density. You can set to any of 33 levels.

5. Set the paper size that you want to print.

■ If you use Fileprint 250, please select paper size set on

the Paper Tray.

(1) Press the cassette select key or the Clear/stop key on the key-

board and keep on for about 5 seconds to enter the paper size

setting mode. At that time, the current paper size appears on the

print display.

Letter

Legal

(2) When pressing plus (+) key of the print number setting key,

the display is changed in due order as

the other hand, when pressing minus (-) key, the display is changed

➞

in due order as

(3) Press the cassette select key or the Clear/stop key to define

paper size that you want to use.

■ If you use Fileprint 400, please select paper Cassette

you want to use.

(1) Press the Clear/stop key and keep on for about 5 seconds to

enter the cassette select mode. At that time, the current paper cas-

sette appears on the print display.

Keyboard display Print display

(2) When pressing the cassette select key or plus (+) key on the

print number setting key, the display is changed in due order as

➞

. On the other hand, when pressing minus

(-) key, the display is changed in due order as

(3) Press the Clear/stop key to define paper size that you want to

use. At that time, the print number display returns to "01".

➞

Tray selection

Multipurpose tray selected

Upper cassette selected

Lower cassette selected

➞

. On

➞