Canon Microfilm Scanner 500 Instrukcja obsługi - Strona 27

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Skaner Canon Microfilm Scanner 500. Canon Microfilm Scanner 500 48 stron.

■ For images with ill defined borders, this function may not operate

■ This function cannot be used when part of the image is outside the

■ If several images are on the screen, the image other than the one

■ This feature cannot print a border larger than 5 mm around an

Setting automatic border removal

An image on negative film is displayed on the screen with a black

border around the image, and this black border will also appear in

your printed copy unless you remove it with the automatic border

removal function.

Remove these black borders around your images to avoid wasting

toner when the images are printed.

-or-

You can also leave the border around the image but with very

little of the black color remaining.

Press the Border key to change the setting.

The lamp to the left of the Border key shows you the current se-

lection. To change the selection, press the Border key until the

lamp lights next to the selection you want to use.

(

) Select for removal of all black color around the image.

(

) Select for removing most of the black color around the im-

age.

Note the following restrictions on the use of this feature:

correctly.

print frame.

you want may print.

image.

OPERATING PROCEDURES