Asus CUW-AM Podręcznik - Strona 18

Przeglądaj online lub pobierz pdf Podręcznik dla Płyta główna Asus CUW-AM. Asus CUW-AM 21 stron.

2. HARDWARE SETUP

The following PANEL illustration is used for items 17-24

CUW-AM

CUW-AM System Panel Connectors

17) Message LED Lead (2-pin MLED)

This indicates whether a message has been received from a fax/modem. The

LED will remain lit when there is no signal and flash when there is data re-

ceived. This function requires an ACPI OS as well as application and driver

support.

18) Keyboard Lock Switch Lead (2-pin KLOCK)

This 2-pin connector connects to the case-mounted key switch to allow key-

board locking.

19) System Management Interrupt Lead (2-pin EXSMI)

This allows the user to manually place the system into a suspend mode or "Green"

mode, where system activity is decreased to save electricity and expand the life

of certain components when the system is not in use. This 2-pin connector con-

nects to the case-mounted suspend switch.

20) System Warning Speaker Connector (4-pin SPEAKER)

This 4-pin connector connects to the case-mounted speaker.

21) Reset Switch Lead (2-pin RESET)

This 2-pin connector connects to the case-mounted reset switch for rebooting

your computer without having to turn off your power switch. This is a preferred

method of rebooting to prolong the life of the system's power supply.

22) System Power LED Lead (3-1 pin PLED)

This 3-1 pin connector connects the system power LED, which lights when the

system is powered ON and flashes when it is in standby (suspend) mode.

0 1

CUW-AM User's Manual

Keyboard Lock

External SMI Lead

Speaker

Message LED

Connector

ATX Power

Switch*

HDLED

Power LED

Requires an ATX power supply.

Reset SW