Double Apex MK7 Garage Control Instrukcja instalacji - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria samochodowe Double Apex MK7 Garage Control. Double Apex MK7 Garage Control 17 stron. Garage control

Drukuj stronę

Step 6:

1. Remove the thin black trim piece on the back side of the button

cluster by releasing the tabs on the bottom. Figure A

2. Push out the right side button blanks and replace with the Gar-

age Control button assembly. Replace the thin black trim. Fig-

ure B

3. Re-install the button cluster. Reconnect all of the connectors

and make sure the short leads on the Garage Control button

harness sit in the recess behind the shifter. Don't secure the

trim with the Torx screws yet.

4. Secure the Y terminal on the Garage Control power harness

behind the T30 Torx bolt on the left side of the fuse panel. Fig-

ure C

5. Remove the 10 amp fuse in postion F36 if equipped. Figure D

Figure A

Figure C

Figure B

Figure D