Double Apex MK7 Garage Control Instrukcja instalacji - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria samochodowe Double Apex MK7 Garage Control. Double Apex MK7 Garage Control 17 stron. Garage control

Drukuj stronę

Step 4:

1. Remove the driver side storage compartment. With the door

open put pressure on outside of the compartment's left wall

while pull outwards to release. Figure A

2. Insert the end of the button harness with the 10 pin connector

through the dash opening. Figure B

3. Route the harness across the fuse panel and out the opening to

the left of the steering column. Figure C

4. Route the harness through the opening on the right of the steer-

ing column and out the back right side of the under dash panel.

Warning: If the harness becomes caught up do not use ex-

cessive force to dislodge. Doing so could cause damage.

Figure C

Figure A

Figure D

Figure B