Doug Fleenor Design NODE2 Podręcznik - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik dla Sprzęt nagrywający Doug Fleenor Design NODE2. Doug Fleenor Design NODE2 10 stron. Two port ethernet to dmx512 interface

Drukuj stronę
Doug Fleenor Design NODE2 Podręcznik
Network configuration page:
The Device Name (up to 20 characters) and Description (up to 64 characters) are fields that
can be queried and displayed by a controller, such as a console, on the network. When editing
these fields it will be necessary to delete or backspace over existing text and trailing spaces.
DHCP can be enabled or disabled. To edit the factory assigned address and mask, the user
must select Disabled. DHCP can then be enabled after editing, if desired. N
2's default is
ODE
Enabled, which works in most applications.
The IP Address and Subnet Mask can be edited here (provided DHCP is disabled). Doug
Fleenor Design recommends against altering the factory assigned values of 10.X.X.X and
255.0.0.0 (where X.X.X is unique).
If the user changes the IP address to 10.X.X.X, the subnet mask should be 255.0.0.0.
If the user changes the IP address to 192.168.X.X, the subnet mask should be 255.255.0.0.
Note that in the graphic above, DHCP has assigned its own address and mask.
Page 8 of 10