Doug Fleenor Design NODE2 Podręcznik - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik dla Sprzęt nagrywający Doug Fleenor Design NODE2. Doug Fleenor Design NODE2 10 stron. Two port ethernet to dmx512 interface

Drukuj stronę
Doug Fleenor Design NODE2 Podręcznik
Five Network Protocols are supported: sACN (default), Art-Net (also popular), draft sACN
(some ETC products), ShowNet (some Strand products), and KiNET (some Color Kinetics
products).
Remember to click Save Settings before navigating away from this page or changes will be
lost.
Port configuration page:
Port A is the left connector, port B is the right connector.
The direction should never need to be changed; it is assigned at the factory to match the
installed hardware. A "Jumper 4" reset-to-default-values will set both ports to outputs, so if one
or both connectors are inputs, the direction will require editing, following a JP4 reset.
The front panel UP/DOWN buttons allow access to universe numbers 1 through 99. This web
page allows setting the universe number up to 63999. If the web interface is used to set a
port's universe number to a value greater than 99, the display will show "- -" and the universe
number cannot be changed from the front panel.
Remember to click Save Settings before navigating away from this page or changes will be
lost.
Page 9 of 10