Baumer Hubner Berlin PMG 10 Instrukcja instalacji i obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Konwerter mediów Baumer Hubner Berlin PMG 10. Baumer Hubner Berlin PMG 10 36 stron. Absolute encoder with magnetic sensing
Również dla Baumer Hubner Berlin PMG 10: Instrukcja instalacji i obsługi (48 strony)
Drukuj stronę
MOUNTING / MOUNTING WITH EURO FLANGE B10
4.
MOUNTING
4.1
Mounting with EURO flange B10
4.1.1
Mounting the spring disk coupling to the encoder
We recommend using the Baumer Hübner spring disk coupling K 35, see
page
11, available as accessory� When other couplings are used pay attention to
manufacturer's notes�
4.1.2
Mounting to drive shaft
)
Lifetime restrictions and angle error by radial deviations
High runout of the drive shaft can cause encoder angle error�
High runout of the drive shaft can cause vibrations, which can shorten the lifeti-
me of the encoder�
» Lubricate drive shaft!
» Minimize drive shaft runout (≤0.2 mm; ≤0.03 mm recommended).
i
The encoder must be mounted with cable connection facing downward and not
exposed to water�
7/33
2�5 mm
7
M
= 100 Ncm
t
9
10 mm
8
MB245EN - 11171693, 17A2, Baumer_PMG10-SSI_II_EN
section 4.3,