AMPHIBICO genesis fs-700 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do kamer AMPHIBICO genesis fs-700. AMPHIBICO genesis fs-700 17 stron. For the sony nex fs-700

Drukuj stronę
PREPARING CAMCORDER & HOUSING
OPENING THE HOUSING
Sit the housing on a flat surface. Press and rotate
the safety latch counter clockwise until the rear door
opens.
REMOVING THE SADDLE
1. Rotate the saddle locking lever towards the right until it
reaches the end. This will disengage the saddle connector.
2. Use the handle to pull the saddle completely out of the housing.
SETTING THE CAMCORDER
1.
Remove hand cradle, mic. support holder and viewfinder hood from camcorder.
2.
Rotate and flip the LCD panel to restore it back to the original position with the LCD
screen facing out.
- Open support holder to expose the mounting screws.
3.
Set display output to "ALL OUTPUT" and set all markers to OFF if using an external monitor
4.
Set AUTO LOCK switch to the manual.
5 .
Audio Settings
- Set Input 2 to MIC
- Set CH1 & CH2 TO "INPUT 2"
- Set audio levels to manual and set dial to level 10 for maximum hydrophone performance.
Page 4