AmpliVox SW223A Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla System głośników AmpliVox SW223A. AmpliVox SW223A 7 stron. 50 watt portable pa system with bluetooth

Drukuj stronę

INSTALL BATTERIES

Battery Power

1. The amp uses 10 " D " size Alkaline batteries

included);

or the optional rechargeable AmpliVox

NiCad Battery Pack (S1465) and (S1460) AC adapter -

purchase separately (Fig 3).

2. Open case and locate battery holder (Fig 1).

3. Lift the battery holder out (Fig 2).

4. Install 10 fresh Alkaline " D" size batteries. Be sure to

observe the polarity when putting batteries in the

battery compartment. The negative (flat) ends go

against the springs. Carefully replace battery holder.

DO NOT MIX BATTERY TYPES OR ATTEMPT TO RE-

CHARGE ALKALINE BATTERIES. EQUIPMENT DAM-

AGE, SAFETY HAZARD OR FIRE COULD RESULT.

Note: The battery holder cable comes from the factory

already plugged into the connector. If it comes

loose, push it in securely. (Turn the plug over if it

doesn't fit; it only fits one way.)

5. Close case.

6. If using the S-1465 NiCad Battery pack

(Fig 3), and S1460 AC Adapter/ Recharger

power supply (both sold separately), plug

into the " DC IN" jack on front panel of the

amp. Plug into a working electrical outlet.

Charge 24 hours for full charge before using.

(not

1-800-572-2194 • DISPLAYS2GO.COM

Fig 1

Fig 2

Fig 3

S-1465

S-1460