AmpliVox SW223A Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla System głośników AmpliVox SW223A. AmpliVox SW223A 7 stron. 50 watt portable pa system with bluetooth

Drukuj stronę

AMPLIFIER FEATURES

14. DC In Jack - plug in optional

Universal AC Adapter/ battery

charger for power

13. Aux Out - for optional 12-15

volt accessory.

12. Condenser Mic Jack - 3.5mm

for lapel or headset mic

11. Bluetooth Receiver - stream

music from any Bluetooth wire-

less device.

10. Wireless Mic Jack - 3.5mm

for optional wireless receiver

9. Auxiliary Line In - 3.5mm

add music with a tape player,

CD or MP3 player

8. Line Out - 3.5mm

record your presentation with a

recorder or on a computer

1. Power Switch

2. Power Indicator Light - Turns red

when power is turned on.

3. Mic Volume Control - This knob

controls output loudness to all 3

microphone inputs and Siren.

4. Dynamic Mic Jack - Dynamic is one

kind of microphone. AmpliVox's wired,

hand-held microphone is this type.

5. Auxiliary Volume Control - This

volume knob controls the auxiliary

volume separately from the

microphone volume.

6. Tone Control - This knob controls the

tone of the auxiliary input. Turn coun

ter-clockwise for more bass or clock

wise for more treble. (The mic jacks

don't need a tone control because

they have been pre-optimized for the

human voice.

7. Left & Right

Speaker Jacks - 1/4 "

7. Left & Right Speaker Jacks - Two

separately amplified speaker jacks allow

you to use one or two speakers for

additional sound power or true stereo

output.

8. Line Out Jack - Can be used with tape

recorder The Line Out Jack outputs all

the sound from the 3 microphone inputs

and the auxiliary input.

9. Auxiliary Line In Jack - To play

music, just plug in your CD player, MP3

player or Amplivox's Bluetooth Receiver.

10. Wireless Mic Jack - You can add an

Optional wireless receiver (S1690R) at

a future date.

11. Bluetooth Receiver - Switchable ON /

OFF

12. Condenser Mic Jack - With phantom

power. If you don't know what phantom

power is, then you don't need to know,

but a condenser microphone won't work

without it. If you have AmpliVox's lapel

or headset microphone, you can plug it

in here.

1-800-572-2194 • DISPLAYS2GO.COM

1. Power Switch

2. Power Indicator Light

3. Mic Volume - con-

trols all 3 mic inputs

4. Dynamic Mic Jack - 1/4"

for wired, hand-held mic.

5. Auxiliary Volume -

controls the auxiliary input

separately from the mic volume

6. Tone Control -

for auxiliary input; counter

clockwise for more bass;

clockwise for more treble

13. Aux Out - For optional 12-15 volt

accessory.

14. DC In Jack - Used for the 12V Battery

Cable, 12V Power Plug or the optional

International AC Adapter/Recharger,

plug it in here. Plug the other end into a

wall / floor outlet.