Ampower A1205 Podręcznik użytkownika - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Ładowarka Ampower A1205. Ampower A1205 2 stron. Red 12 aviation automatic battery charger, output: 12vdc, 5amp, input: 100-240vac, 50-60hz, 3amp automatic sensing

PART NO.:
A1205
OUTPUT:
12VDC / 5AMP
INPUT:
100-240VAC / 50-60Hz / 3AMP / AUTOMATIC SENSING - WORLDWIDE
Dimensions: (L x W x H) mm 179.39 x 87.31 x 46.04 / inch 7 1/16 x 3 7/16 x 1 13/16
Weight:
0.8 Kgs / 1.76 Lbs
Charging
Started
DC Voltage
AC Current
Constant Current
OPERATING INSTRUCTIONS
1. Check the "Start/Stop" switch to ensure it's in the "Stop" position.
2. Connect the Red alligator clip to the positive/+ battery terminal, and the Black alligator
clip to the negative/- battery terminal.
3. Plug the charger to an AC power source.
4. Press the "Start" switch to start the charging sequence.
INDICATIONS
1. "Red" LED: there is power to the unit and the "Start" switch is turned on.
2.
"Amber
/ Green" LED (dual colored LED):
Ready / Float Charge". Charger will automatically switch to "Float Mode" and can be
left on continuously without harming the battery.
3. "Red" flashing LED: means the charger does not see a load at the battery due to a
"reverse polarity" or "open/blown fuse" condition. Fuse located on front of unit – use
5AMP / 250V fuse only.
4. Fan runs at a higher speed during bulk/absorption charge mode than it does during float
charge.
www.ampoweronline.com
Bulk Charge
Absorption Charge
Absorption Time
B
attery Charge
Rate
Constant Voltage
Time
• 210-979-9536 • 226 East Rhapsody Drive, San Antonio, Texas 78216
Float Charge
3-Stage Battery Charger DC
Voltage and AC Current
Charge Profile
Reduced Current and Voltage
"Amber
– Bulk / Absorption Charge",
"Green