Amp’ed RF Technology BT-AP111 Podręcznik użytkownika - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Bezprzewodowy punkt dostępowy Amp’ed RF Technology BT-AP111. Amp’ed RF Technology BT-AP111 12 stron. Bluetooth to ethernet bridge
Również dla Amp’ed RF Technology BT-AP111: Podręcznik użytkownika (9 strony)
Drukuj stronę5)
Server IP
Specifies the IP address of the telnet server when the "Telnet Mode" is set to "Client".
6)
Timeout
Specifies the telnet timeout in seconds. The default is 0 and specifies that no timeout is to be used.
NOTE: After changing the settings, click the "Apply Changes" button to cause the changes to take effect. If the
"Make these the default settings" check box is checked before clicking the "Apply Changes" button, then the new
settings are applied each time the BT-AP 111 module is reset. Otherwise, the existing defaults are used whenever
the module is next reset.
a BT-AP 111.
©2010 Amp'ed RF Technology
09/10/2010
Before submitting your Telnet settings there is a check box to make a default settings for
1879 Lundy Ave, Suite 138, San Jose, CA 95131, USA
www.ampedrftech.com
Amp'ed RF Technology, Inc.
(phone) 408 213-9530
(fax) 408 213-9533
BT-AP 111 Datasheet
Page 9 o f 12