DQ Cassius Instrukcja instalacji - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Grzałka DQ Cassius. DQ Cassius 10 stron. Vertical radiator

Use a screwdriver to open the air vent, open the valve and let the water rush into the

radiator.

Check all connection for leaks.

Once water overﬂows from the air vent, there is no air in the tube.

Use a screwdriver to close the air vent, turn on the valve and the radiator is ready for

use.

Radiators are made from steel with plating and should not be cleaned with corrosive or

scouring cleaning agents.

When your radiator doesn't function, knowing basic radiator troubleshooting can save

you from the stress and the hassles of a non-functioning radiator. Here is a guide to

solve the most common problems associated with these radiators.

Problem

Cold spots on the

radiator unit

Leak on the

radiator

Sound of whistling

or water whooshing

Clanking sound

AFTER INSTALLATION

CARE & CLEANING

TROUBLE SHOOTING

Cause

-Water is not ﬂowing

through radiator properly

-Valve nut is loose

-Welding problem

-Radiator was not

properly balanced

when it was installed

-The radiator was

installed in a space

that doesn't allow for

pipe expansion

Action

1.Check to make sure there is no

trapped air inside the radiator.

"Bleed" the radiator to release air.

2.Make sure the valve is fully open

to allow water to run freely. Some

radiators may need diverter for

water to ﬂow properly around the

unit.

-Tighten the valve nut

-Replace radiator

-Re-install