AMS Controls XL200 Series Specyfikacje - Strona 3

Przeglądaj online lub pobierz pdf Specyfikacje dla Kontroler AMS Controls XL200 Series. AMS Controls XL200 Series 8 stron. Bar code scanner specifications
Również dla AMS Controls XL200 Series: Instrukcja wymiany akumulatora (5 strony), Instrukcja wymiany akumulatora (8 strony), Instrukcja wymiany akumulatora (8 strony)

Symbol DS3408 and LS3408 Bar Code Scanner Setup

Note: The following setup procedure works only with the Symbol DS3408 and LS3408 bar code scanner.

For other bar code scanners, please contact the manufacturer for proper setup procedures.

When a Symbol DS3408 or LS3408 bar code scanner is connected to an XL200 series controller for the

first time, the scanner must be setup to properly communicate with the controller before it can be used

for data entry.

Setup Procedure

1. Turn on the scanner. The scanner plays a musical tone, indicating it is on.

2. Turn off the XL200 series controller, but leave the scanner turned on.

3. For wireless scanners, use the scanner to scan the wireless base first. Failing to do this will

prevent the bar code scanner from functioning properly.

4. Scan this bar code:

When the scanner successfully scans the bar code, it beeps.

5. Turn on the controller.

a. If the scanner makes any sound while the controller boots, you must repeat the scanner

setup process.

b. If the scanner remains silent while the controller boots, the scanner is successfully setup.

Scanner Startup Bar code