DRAKE SDE24 Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Modulator DRAKE SDE24. DRAKE SDE24 18 stron. Hybrid qam modulator; digital tuner and demodulator module; encoder module; asi input module
Również dla DRAKE SDE24: Instrukcja obsługi (19 strony)
Drukuj stronę
8
Rear Panel Connections
R1
R7
RF OUTPUT
REAR PANEL CONNECTIONS
R
1, RF OUTPUT – This type "F" connector is the high level
(+45 to +61 dBmV), 54 to 1002 MHz, output from the EH24
RF output section.
R2, S-VIDEO 1 & 2 - These S-Video type connectors
provide two separate S-Video inputs to the SDE24 Encoder.
R3, VIDEO 1 & 2 - These two RCA type connectors color
coded yellow provide two separate video inputs to the SDE24
Encoder.
R4, AUDIO 1 & 2 - These four color coded RCA type connec-
tors provide audio Left (white) and Right (red) inputs to the
SDE24 Encoder.
R5, This is space available for additional SDE24 Encoders
which may be installed in the EH24 Encoder Host.
R2
R3
R4
S-VIDEO
S-VIDEO
1
2
1
2
1 VIDEO
2
1 VIDEO
2
1
2
1
2
L
L
1
2
1
2
R
R
AUDIO
AUDIO
SDE24
SDE24
R5
R6
R7
R6, ASI OUTPUT - This BNC type connector provides ASI
output of the multiplexed transport streams from selected
encoders.
R7, Cooling Air Vents
R8, RS232 IN - Connection to a PC or modem for use with
remote control / monitoring program or for firmware down-
load.
R9, RS232 OUT - Loop to another EH24 or other RS232
controllable device.
R10, AC Line Cord – For connection to the nominal
120 VAC power source. This unit is designed for use in
countries with 120 VAC power standards but the power
supply will accept an input voltage range of 90 VAC minimum
to 132 VAC maximum with a power line frequency of from 47
to 63 Hz. The maximum power consumption is 70 watts.
R8
R9
R10
AC POWER
ASI OUTPUT
120 VAC 60 HZ
70 WATTS
IN
RS232
OUT