DRAKE ESR-T121 Instrukcja obsługi - Strona 12
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik DRAKE ESR-T121. DRAKE ESR-T121 18 stron. Digital terrestrial receiver
Drukuj stronęStandard: to choose the suitable display system
Audio Output: to choose the suitable audio system
Put the cursor on the Time Setting instruction to
enter its submenu and the picture shows as
Time zone: to select the right time zone refer
to the GMT area according to the location you
inhabiting
Current Time: to show the current time that
sent from the local television station
Auto power off/ on: to set the auto power
instructions to instruct this device when to turn
on and to be standby
Use the red key to remove the parameter value
and the green key to save the installation
Put the cursor on the Advance Setting instruction
strip to enter its submenu that shows as:
Entry needs the right cipher
Enter the submenu of Change Pin Code, fill a
group of digits and then refill which to produce
the new code. If the set the status of Scan
Lock instruction on "on" then the entry of the
Scan instruction needs the code input (the
default code is 8888)
Put the cursor on the Factory Setting instruction
to enter its submenu and which shows us as
System info: to show the software version,
date etc. related information
Restore default: to reset the installation.
Note: all the data former your set will be
cleared if you confirm the reset
Software update: to update your built-in
software of the device through pc to box and
box to box the two categories; the following is
the operation steps of an instance:
Pc to box: connect the serial interfaces of pc
and box with serial cable and make sure that
the two interfaces are accordant; dblclick the
10