DRAKE ESR-T121 Manual de instruções - Página 12

Procurar online ou descarregar pdf Manual de instruções para Recetor DRAKE ESR-T121. DRAKE ESR-T121 18 páginas. Digital terrestrial receiver

Standard: to choose the suitable display system

Audio Output: to choose the suitable audio system

Put the cursor on the Time Setting instruction to

enter its submenu and the picture shows as

Time zone: to select the right time zone refer

to the GMT area according to the location you

inhabiting

Current Time: to show the current time that

sent from the local television station

Auto power off/ on: to set the auto power

instructions to instruct this device when to turn

on and to be standby

Use the red key to remove the parameter value

and the green key to save the installation

Put the cursor on the Advance Setting instruction

strip to enter its submenu that shows as:

Entry needs the right cipher

Enter the submenu of Change Pin Code, fill a

group of digits and then refill which to produce

the new code. If the set the status of Scan

Lock instruction on "on" then the entry of the

Scan instruction needs the code input (the

default code is 8888)

Put the cursor on the Factory Setting instruction

to enter its submenu and which shows us as

System info: to show the software version,

date etc. related information

Restore default: to reset the installation.

Note: all the data former your set will be

cleared if you confirm the reset

Software update: to update your built-in

software of the device through pc to box and

box to box the two categories; the following is

the operation steps of an instance:

Pc to box: connect the serial interfaces of pc

and box with serial cable and make sure that

the two interfaces are accordant; dblclick the