Bosch 6 Series Instrukcja instalacji i użytkowania - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja instalacji i użytkowania dla Spryskiwacz Bosch 6 Series. Bosch 6 Series 20 stron. 2 door top freezer, inox-easyclean
Również dla Bosch 6 Series: Podręcznik użytkownika (24 strony), Instrukcja instalacji i użytkowania (20 strony), Instrukcja instalacji i użytkowania (20 strony), Instrukcja obsługi i instrukcja instalacji (48 strony), Instrukcja obsługi (16 strony), Instrukcja obsługi (48 strony), Instrukcja instalacji (27 strony), Instrukcja obsługi (12 strony), Instrukcja instalacji i obsługi (36 strony), Instrukcja obsługi (16 strony), Instrukcja instalacji i użytkowania (16 strony), Instrukcja obsługi (29 strony), Podręcznik użytkownika i instrukcje instalacji (16 strony), Informacje dotyczące użytkowania (32 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Informacje dotyczące użytkowania (28 strony), Podręcznik użytkownika (23 strony), Instrukcja obsługi (24 strony), Instrukcje instalacji i użytkowania (24 strony), Informacje dotyczące użytkowania (16 strony), Podręcznik użytkownika (36 strony), Podręcznik użytkownika (32 strony), Podręcznik użytkownika (28 strony), Podręcznik użytkownika (28 strony), Instrukcja obsługi (28 strony), Informacje dotyczące użytkowania (20 strony), Instrukcja obsługi (28 strony)

Bosch 6 Series Instrukcja instalacji i użytkowania
Operating the appliance
en
Saturation display
If the metal grease filters or the activated charcoal filter
are/is saturated, the corresponding symbols flashes
after the appliance is switched off:
Metal grease filters: # and 1
Activated charcoal filter: # and 2
Metal grease filter and activated charcoal filter: #,
1 and 2
If you have not yet done so, the metal grease filters
should now be cleaned or the activated charcoal filter
replaced. ~ "Cleaning and maintenance" on page 10
The saturation indicator does not apply for non-
Note:
renewable activated charcoal filters that are inserted
downstream of the metal grease filter. These activated
charcoal filters must be replaced twice a year.
The saturation indicators can be reset while they are
flashing. To do this, touch the # symbol.
Switching over the display for air recirculation mode
For air recirculation mode, the electronic controller must
be switched over accordingly:
The extractor hood must be connected and switched
off.
Touch and hold the D symbol. Touch the "2"
symbol.Take your finger off the D symbol. This
will switch the electronic controller over to air
recirculation mode (filters that cannot be
regenerated).
Touch and hold the D symbol. Touch the "3"
symbol.Take your finger off the D symbol. This
will switch the electronic controller over to air
recirculation mode (filters that can be regenerated).
Repeatedly touching and holding the D symbol
and touching the "1" symbol switches the electronic
controller back over to air extraction mode.
8
Audible signal
Switching on
Touch and hold the # and y symbols at the same time
for approximately 3 seconds when the fan is switched
off. An audible signal will sound as an
acknowledgement.
Switching off
Touch and hold the # and y symbols at the same time
for approximately 3 seconds when the fan is switched
off. An audible signal will sound as an
acknowledgement.