Draper nocturne+ c Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Ekran projekcyjny Draper nocturne+ c. Draper nocturne+ c 6 stron. Outdoor crank-operated projection screen
Również dla Draper nocturne+ c: Instrukcja instalacji i obsługi (4 strony), Instrukcja obsługi (10 strony), Instrukcje instalacji i obsługi (8 strony)
Drukuj stronę
Nocturne+ C
Section 4 - Installing Cable Guides
1.
Loosly fasten the
nut on the cable
on the bottom
bracket
(wall
mount option
.
shown)
7.
PLEASE NOTE:
Use an appropriately sized crimping
tool, such as the one shown below.
7
(20cm)
CAUTION: Headbox
shown removed from
image for demonstration
purposes ONLY.
Do not remove endcap or
disassemble unit.
3.
Pull cable through the
hole in the endcap
flange until taut.
4.
2.
Pull cable up through
hem bar eyelet.
Crimp the
barrels
approximately
1/ 8 "
above
(3mm)
pencil mark.
Mark cable at
the bottom of
the endcap
flange.
8.
Cut cable
approximately
1"
above
(25mm)
crimped barrels.
9.
Pull cable
down, until
crimped
barrels are
resting on
the flange.
5.
Undo the nut and
pull the cable down,
until the mark aligns
with the bottom
of the endcap
(deck mount
.
option shown)
6.
10.
Reassemble cable
and nut on the
bottom bracket and
tighten
option shown)
page 4 of 6
Strip cable
to that spot.
(wall mount
.