Draper CS14A Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Piła Draper CS14A. Draper CS14A 12 stron. 350mm chop saw
Również dla Draper CS14A: Instrukcja obsługi (16 strony)

Drukuj stronę
Draper CS14A Instrukcja obsługi
WARNING:
FOR YOUR OWN SAFETY ALWAYS TURN THE MAIN SWITCH ON
THE MACHINE 'OFF' AND REMOVE THE PLUG FROM THE POWER
SUPPLY BEFORE CARRING OUT ANY MAINTENANCE OR

TROUBLESHOOTING.

Motor
Trouble
Motor does not
start.
General
Trouble
Powerhead wobbles
Power head will
not rise fully.
Disc binds jams
Tool vibrates
or shakes
TROUBLESHOOTING
Probable Cause
1. Fuse.
2. Brushes warn.
3. Other.
Probable cause
1. Loose pivot points
1. Part failure
2. Pivot spring not
replaced
properly after service.
1. Improper operation
2. Warped disc.
1. Disc not round.
2. Disc damaged.
3. Disc loose.
4. Other
Remedy
1. 13 amp time delay fuse or
circuit breaker.
2. See page 8.
3. Authorized service agent.
Remedy
1. Check/replace worn parts
1.Authorised service agent
2.Authorised service agent
1. See basic saw operation
2. Replace disc
1. Replace disc
2. Replace disc
3. Tighten wheel flang
securing bolt.
4. Authorised service agent.
- 10 -