Draper CS14A Talimatlar Kılavuzu - Sayfa 11

Testere Draper CS14A için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Draper CS14A 12 sayfaları. 350mm chop saw
Ayrıca Draper CS14A için: Talimatlar Kılavuzu (16 sayfalar)

Sayfayı Yazdır
Draper CS14A Talimatlar Kılavuzu
WARNING:
FOR YOUR OWN SAFETY ALWAYS TURN THE MAIN SWITCH ON
THE MACHINE 'OFF' AND REMOVE THE PLUG FROM THE POWER
SUPPLY BEFORE CARRING OUT ANY MAINTENANCE OR

TROUBLESHOOTING.

Motor
Trouble
Motor does not
start.
General
Trouble
Powerhead wobbles
Power head will
not rise fully.
Disc binds jams
Tool vibrates
or shakes
TROUBLESHOOTING
Probable Cause
1. Fuse.
2. Brushes warn.
3. Other.
Probable cause
1. Loose pivot points
1. Part failure
2. Pivot spring not
replaced
properly after service.
1. Improper operation
2. Warped disc.
1. Disc not round.
2. Disc damaged.
3. Disc loose.
4. Other
Remedy
1. 13 amp time delay fuse or
circuit breaker.
2. See page 8.
3. Authorized service agent.
Remedy
1. Check/replace worn parts
1.Authorised service agent
2.Authorised service agent
1. See basic saw operation
2. Replace disc
1. Replace disc
2. Replace disc
3. Tighten wheel flang
securing bolt.
4. Authorised service agent.
- 10 -