Draper Motorized FlexShade Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wyposażenie wnętrz Draper Motorized FlexShade. Draper Motorized FlexShade 12 stron. Motor operated window shades with several control options
Również dla Draper Motorized FlexShade: Instrukcja instalacji i obsługi (8 strony)
Drukuj stronęMotorized FlexShade
6.
Replace motor end roller to
endcap or bracket.
(Bracket option shown.)
SHAFT
FULLY
RETRACTED
7.
Repeat steps 3-6 to install the next
coupler
to mounting surface.
(s)
CAUTION: The end of the previously-
C
installed coupler shaft should be flush
with the outside edge of the bearing.
If coupler shaft extends beyond
the bearing, retract coupler shaft of
the previously installed roller to the
intermediate position.
SHAFT
FULLY
EXTENDED
®
(Coupled)
B
Caution: Ensure the operator-end
fabric/roller assembly's coupler
shaft is fully retracted
(see "Operating the Retractable Shaft.")
Final
8.
A
Installer #1 places the idler-end
sliding shaft onto the
idler-end bracket
or endcap.
9.
Attach idler end
to Idler Bracket.
A
C
.
Fabric/Roller Assembly
(Idler-end)
Lift both ends of the idler-end fabric/roller
assembly into place and align between
the brackets/endcaps.
A
Lock shaft in place.
(Endcap option shown.)
Rotate Hook
to secure.
page 7 of 12
SHAFT
HALF
EXTENDED
(Bracket option shown.)
B
Installer #2 fully extends coupler shaft of
previously installed roller by rotating the
metal ring clockwise about ½ of a turn when
viewing the face of the coupler assembly
(see "Operating the Retractable Shaft" and Fig. 2)
until the shaft extends fully into the receiver
of the idler-end fabric/roller assembly.
CAUTION: Ensure shaft is LOCKED IN PLACE
with retaining clip!
,
Attach Retaining
Clip to Shaft.