Draper 65084 Oryginalna instrukcja obsługi - Strona 12
Przeglądaj online lub pobierz pdf Oryginalna instrukcja obsługi dla Sander Draper 65084. Draper 65084 20 stron. Dual action air composite sander
Również dla Draper 65084: Podręcznik użytkownika (16 strony)
Drukuj stronę
7. Operating Instructions
Important: ALWAYS ensure that the product is correctly
prepared and lubricated before operation. Read all the
safety and preparation instructions in this manual
before use.
WARNING! The workpiece MUST be firmly
secured in place before operation. DO NOT
hold the workpiece by hand.
1. Ensure that the air line is securely connected
and pressurised.
2. Rotate the exhaust (4) to position it so that any
disturbance of existing dust or dust generated by
the operation is minimised.
3. Pull the retaining clip (6) out from under the trigger
lever (9) to remove it and retain it for future use.
(6)
Fig.
5
CAUTION! DO NOT attempt to operate the
tool with the retaining clip still in place.
4. Place the tool against the workpiece and depress the
trigger lever to start the tool.
Important: Start the operation with the tool against
the workpiece to prevent gouging upon first contact.
5. Adjust the position of the speed control lever (8) to
alter the airflow into the tool and set the sanding
speed as appropriate.
Fig.
6
6. To stop the tool, release the trigger lever as you lift it
away from the workpiece.
(9)
Important: Reinstall the retaining clip and
depressurise and disconnect the air line when the
tool is not in use for extended periods.
The direction of rotation is indicated on the shroud (7).
Important: When operating the sander, use only the
flat surface of the sanding pad against the workpiece;
DO NOT use the edges of the sanding pad and
backing plate.
– 12 –
EN
(8)