Draper 65084 Orijinal Talimat Kılavuzu - Sayfa 12

Sander Draper 65084 için çevrimiçi göz atın veya pdf Orijinal Talimat Kılavuzu indirin. Draper 65084 20 sayfaları. Dual action air composite sander
Ayrıca Draper 65084 için: Kullanıcı Kılavuzu (16 sayfalar)

Sayfayı Yazdır

7. Operating Instructions

Important: ALWAYS ensure that the product is correctly

prepared and lubricated before operation. Read all the

safety and preparation instructions in this manual

before use.

WARNING! The workpiece MUST be firmly

secured in place before operation. DO NOT

hold the workpiece by hand.

1. Ensure that the air line is securely connected

and pressurised.

2. Rotate the exhaust (4) to position it so that any

disturbance of existing dust or dust generated by

the operation is minimised.

3. Pull the retaining clip (6) out from under the trigger

lever (9) to remove it and retain it for future use.

(6)

Fig.

CAUTION! DO NOT attempt to operate the

tool with the retaining clip still in place.

4. Place the tool against the workpiece and depress the

trigger lever to start the tool.

Important: Start the operation with the tool against

the workpiece to prevent gouging upon first contact.

5. Adjust the position of the speed control lever (8) to

alter the airflow into the tool and set the sanding

speed as appropriate.

Fig.

6. To stop the tool, release the trigger lever as you lift it

away from the workpiece.

(9)

Important: Reinstall the retaining clip and

depressurise and disconnect the air line when the

tool is not in use for extended periods.

The direction of rotation is indicated on the shroud (7).

Important: When operating the sander, use only the

flat surface of the sanding pad against the workpiece;

DO NOT use the edges of the sanding pad and

backing plate.

– 12 –

(8)