Draytek Vigor2952 Series Skrócona instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Firewall Draytek Vigor2952 Series. Draytek Vigor2952 Series 16 stron. Dual-wan security firewall
Również dla Draytek Vigor2952 Series: Skrócona instrukcja obsługi (15 strony)
Drukuj stronę
Right LED
(Green)
Interface
Description
Factory Reset
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will
restart with the factory default configuration.
Wireless LAN
WLAN On - Press the button and release it within 2 seconds. When
ON/OFF/WPS
the wireless function is ready, the green LED will be on.
WLAN Off - Press the button and release it within 2 seconds to turn
off the WLAN function. When the wireless function is not ready, the
LED will be off.
WPS - When WPS function is enabled by web user interface, press
this button for more than 2 seconds to wait for client's device making
network connection through WPS.
Fiber
Connector for accessing the Internet.
WAN1~WAN2
Connector for remote networked devices.
LAN1~LAN4
Connectors for local networked devices.
USB1~USB2
Connector for a USB device (for 3G/4G USB Modem or printer).
PWR
Connector for a power cord.
Power Switch.
ON/OFF
Note
Vigor router will use either Fiber WAN or WAN1 for Internet connection. If
both Fiber WAN and WAN1 are connected at the same time, Fiber WAN will
be the first choice.
Blinking
The data is transmitting.
On
The port is connected with 1000Mbps.
Off
The port is connected with 10/100Mbps.
4