ADVANCED FLOORTECH AF-X1 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Scrubber ADVANCED FLOORTECH AF-X1. ADVANCED FLOORTECH AF-X1 13 stron. Floor scrubber

AF-X1

4.0 Routine maintenance and

replacement of wearing parts

Preparing before working

According to the soiled state of the ground, select the clearing agent and the

concentration of the clearing agent:

In general, you only need 2 cups of cleaning solution in a disposable water cup

(disposable water cups are commonly used, in order to protect the environment, please

minimize the amount of detergent, please use a neutral low-foaming detergent).

Eliminate recovery tank foam and extend suction motor life.

●Add detergent from the front water filling port, and then start filling the clean water tank

with clean water.

If you are taking water from the tap with a hose, you can plug the hose directly into the

filling hole on the side of the machine: however, you need to pay attention to the water

level so that the cleaning fluid does not overflow.

Start work

●In the area to be cleaned, the ground should be cleaned first to remove large debris

and dust, and the cleaning can be carried out after confirming that the ground is free of

debris such as mud, stones, paper scraps, etc., which will improve your work efficiency

and protection. Machines have great benefits.

●Activate the power switch lock, the battery indicator lights up, check the battery power,

and confirm that the battery is sufficient before proceeding.

Cleaning operation

If the battery is low, please charge the battery!

●Turn the forward/backward switch to the forward gear, start the brush motor, water

suction motor, and button in sequence, adjust the flow of clean water (detergent)