Draytek VigorAP 802 Skrócona instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Bezprzewodowy punkt dostępowy Draytek VigorAP 802. Draytek VigorAP 802 11 stron. 802.11ac dual-band wall plug ap
Również dla Draytek VigorAP 802: Skrócona instrukcja obsługi (9 strony)
Drukuj stronę
Descriptions of Components
LED
Status
ACT
Off
Blinking
2.4G
On
Off
Blinking
5G
On
Off
Blinking
LAN
On
Off
Blinking
Uplink
On
Off
Explanation
The VigorAP is powered off.
Slowly: The VigorAP is ready and operating
normally.
Quickly: The system is booting up or resetting to
the Factory Default value.
2.4GHz Access Point is active.
2.4GHz Access Point is turned off.
Data is being transmitted on the AP's 2.4GHz
wireless interface.
5GHz Access Point is active.
5GHz Access Point is turned off.
Data is being transmitted on the AP's 5GHz
wireless interface.
Ethernet LAN (RJ45) is connected.
Ethernet LAN is disconnected.
Data is transmitting (sending/receiving).
AP mode: The Ethernet cable is connected.
Mesh Node: Connected to Mesh network.
Range Extender: Connected to Wireless Network.
AP mode: The Ethernet cable is not connected.