Draytek VigorAP 802 Skrócona instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Bezprzewodowy punkt dostępowy Draytek VigorAP 802. Draytek VigorAP 802 11 stron. 802.11ac dual-band wall plug ap
Również dla Draytek VigorAP 802: Skrócona instrukcja obsługi (9 strony)
Drukuj stronę
Blinking
Mode
On
Flash once
Flash twice
Button
Factory Reset
LED On/Off
Interface
LAN
Mesh Node: Disconnected from Mesh network.
Range Extender: Disconnect from Wireless
Network.
AP mode: The system is scanning the surrounding
network. Or WPS is enabled and the system is
waiting for response from the wireless client.
Mesh Node: Attempting to connect to Mesh
network.
Range Extender: Connecting to Wireless Network.
VigorAP is operating in AP mode.
VigorAP is operating as a Mesh Node.
VigorAP is operating as a Range Extender.
Restore the default settings. Usage: Turn on the
VigorAP (ACT LED is blinking). Press gently and
hold for more than 15 seconds. When the ACT LED
blinks rapidly, release the button and the AP will
restart with its Factory Default configuration.
Press it and release it within 2 seconds.
Explanation
RJ-45 Gigabit Ethernet connectors for local network devices /
uplink to router.
Mesh Node & Range Extender: Connect any Ethernet network
devices, such as a PC, TV, camera or switch to use the VigorAP
802 as a wireless uplink.