AND UA-704 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Monitor ciśnienia krwi AND UA-704. AND UA-704 16 stron.
Również dla AND UA-704: Instrukcja obsługi (16 strony)

Drukuj stronę

Applying the Arm Cuff

1. Wrap the cuff around the upper arm,

about 1-2 cm above the inside of the

elbow, as shown.

Place the cuff directly against the

skin, as clothing may cause a faint

pulse and result in a measurement

error.

2. Constriction of the upper arm, caused

by tightly rolling up a shirtsleeve, may

prevent accurate readings.

3. Confirm that the index

within the proper fit range.

How to Take Accurate Measurements

For the most accurate blood pressure measurement:

Sit comfortably on a chair. Rest your arm on the table. Do not cross

your legs. Keep your feet flat on the floor and straighten your back.

Relax for about five to ten minutes before measurement.

Place the center of the cuff at the same level as your heart.

Remain still and keep quiet during measurement.

Do not measure immediately after physical exercise or a bath. Rest for

twenty or thirty minutes before taking the measurement.

Try to measure your blood pressure at the same time every day.

Measurement

During measurement, it is normal for the cuff to feel very tight.

Measure your blood pressure according to the section "Measurement".

After Measurement

Press the exhaust valve to exhaust air from the cuff.

Press the

START

Remove the cuff and record your data.

Note: The device has an automatic power shut-off function, which turns off

the power automatically one minute after measurement.

Allow at least three minutes between measurements on the same

person.

Using the Monitor

points

button to turn off the power.

English 8

Do not roll up shirtsleeve tightly

Cuff

1-2 cm

Artery position mark

Secure the fabric

fastener firmly

Index

and Proper fit range

Air hose