formlabs GALVO Czyszczenie - Strona 2

Przeglądaj online lub pobierz pdf Czyszczenie dla Wyposażenie wnętrz formlabs GALVO. formlabs GALVO 7 stron.

1. Remove the Back Panel

2. Unplug Cables + Laser

At the back of the Form 1+, remove two black button-head screws on either

side using the 2.5mm hex wrench. Lift the cover and remove two silver

countersunk screws under the cover. Some machines may also have two

silver countersunk screws along the rear edge on the bottom of the Form

1+.

Carefully remove the back panel after all screws have been removed.

Laser

Properly label the galvanometer cables so they will not be switched when

plugging them back in. Unplug the connectors to the Y-Galvanometer, the

X-Galvanometer, and the laser.

DO NOT COPY OR REDISTRIBUTE THIS INFORMATION

Y Galvanometer

X Galvanometer

2/7