Carmanah R247 Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt oświetleniowy Carmanah R247. Carmanah R247 15 stron. Solar led roadway light / 24-hour hazard flasher

Drukuj stronę

Owner's Manual | Model R247

1.0 Introduction

Congratulations on purchasing the Carmanah Model R247 solar-powered LED roadway hazard

flasher, "the world's most advanced solar LED hazard flasher." The R247 is intended to

increase the visibility of roadway hazards using a completely self-contained unit that is very

easy to install on an existing signpost. Using LED illumination, the unit is designed to operate

reliably with no scheduled maintenance for up to 5 years except for routine cleaning.

1.1

How it Works

The Carmanah Model R247 does not require an external power supply as it operates using a

pair of solar-charged batteries that are maintenance free for up to five years when the product

is properly installed. The R247 consists of a single LED array that will cast a highly visible light

towards oncoming traffic in all conditions. It can also be adjusted to meet varying brightness

requirements.

Activation of the R247 is performed at the time of installation, and from then on, the R247 will

flash 24 hours a day, 7 days a week with no down-time required for charging. The output

brightness will automatically change at dusk and dawn to provide optimum visibility, day and

night.

The light is completely power-autonomous therefore no wiring to an external power supply is

required. Trenching of wire to a power source, pavement cutting and traffic disruption are not a

concern with the R247 as everything is contained within the unit itself. It can be mounted

wherever there is sunlight.

2.0 Product Assembly / Installation

2.1

Tools Required

•

Socket Set

•

Power Drill

•

3/16" drill bit

•

Multi-bit screwdriver

•

1/8" hex driver

•

Ladder or lift device

•

Lithium grease

•

Knowledge of local latitude

•

Compass

Installation time can be budgeted at approximately ten minutes in the shop plus one hour in the

field per R247 system. This time budget is assuming that a pole is already in place in the field

to mount the unit on. No trenching, external cabling, traffic disruption or site remediation is

required.

Document number: MAN_ROAD R247 Owner's Manual 37224_vE

Last revised: November 7, 2006