Andersen A1 Instrukcja instalacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria samochodowe Andersen A1. Andersen A1 14 stron.

A N D E R S E N

A 1 I N S T A L L A T I O N G U I D E

C H E C K T H E P A R T S

Check the supplied carton(s). See

exploded view of packing, fig F1.1

If there is any significant visible damage

to the main carton, A then photograph

the damage and sign for the carton as

damaged before opening. Report the

damage to the sender.

Place the main carton, A on a stable firm

surface the correct way up and open the

top. Take care not to cut items in the carton.

Remove the smaller carton, B from the

top of the main carton, open and check

that the correct decorative front panel,

1-0 is present and undamaged.

NOTE: There are two available types of panel,

Metal, 1-1 OR Wood 1-2, only one panel is

supplied per charger.

Place decorative front panel back in its

carton for later use.

Remove back panel, item

2-0, check it is undamaged and place to

the side for later use.

Remove the control unit, 3-0, check that

it is the correct model and colours and

is undamaged, take care and do NOT

remove any of the protective films, replace

back in the main carton for later use.

Remove the accessory pack 4-0 and

check it contains: -

4-1 4 x decorative front panel

retention screws.

4-2 4 x back panel spacer washers.

4-3 2 x charger retention

tamperproof screws.

Place to one side for later use.

Fig F1.1

3-0

A N D E R S E N

1-1

2-0

PAGE 3