Anderson RB580 Skrócona instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt rolniczy Anderson RB580. Anderson RB580 6 stron.

Anderson RB580 Skrócona instrukcja obsługi
QUICK START GUIDE
RB580
Hook the machine to a tractor to test it.
Attach the machine hoses to the tractor as
shown. Be sure that your tractor is adjusted
at a flow rate of 8 GPM at 2000 PSI.
Turn on the bale counter and set.
1) Press the on button
2) You will have to set the counter. To do so you will hold the Adjust Select for 3
seconds. You can then scroll through 4 menus with the same button (adjust
select)
3) Use the + and – to change the values of the menu.
4) When wrapping you will hear a buzzer from the counter on the last turn so
that you know when to stop turning the table. The number will automatically
reset once the sequence is finished.
Quick reference for correct plastic layers:
The way that we calculate the amount of plastic to apply on a bale is simple. You wrap the bale manually one
time with only one layer of plastic. You do not want to see any part of the bale when you are finished. You
take the number of turns of the table that it took you to do this and multiply by 2 and add one extra layer (or
turn).
EX: 10 turns to completely cover the bale x 2 = 20. plus one layer = 21. This is the number you want to
program in your bale counter.
Once the bale counter is setup you can
start wrapping with the manual lever.
The manual lever can be installed in the
tractor with the extension cable, so you
can operate from the tractor.