Anderson RB580 Hızlı Başlangıç Kılavuzu - Sayfa 4

Çiftlik Ekipmanları Anderson RB580 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Anderson RB580 6 sayfaları.

QUICK START GUIDE

RB580

Hook the machine to a tractor to test it.

Attach the machine hoses to the tractor as

shown. Be sure that your tractor is adjusted

at a flow rate of 8 GPM at 2000 PSI.

Turn on the bale counter and set.

1) Press the on button

2) You will have to set the counter. To do so you will hold the Adjust Select for 3

seconds. You can then scroll through 4 menus with the same button (adjust

select)

3) Use the + and – to change the values of the menu.

4) When wrapping you will hear a buzzer from the counter on the last turn so

that you know when to stop turning the table. The number will automatically

reset once the sequence is finished.

Quick reference for correct plastic layers:

The way that we calculate the amount of plastic to apply on a bale is simple. You wrap the bale manually one

time with only one layer of plastic. You do not want to see any part of the bale when you are finished. You

take the number of turns of the table that it took you to do this and multiply by 2 and add one extra layer (or

turn).

EX: 10 turns to completely cover the bale x 2 = 20. plus one layer = 21. This is the number you want to

program in your bale counter.

Once the bale counter is setup you can

start wrapping with the manual lever.

The manual lever can be installed in the

tractor with the extension cable, so you

can operate from the tractor.