Community Playthings G257 Instrukcja obsługi produktu - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi produktu dla Meble dla niemowląt i małych dzieci Community Playthings G257. Community Playthings G257 12 stron. Community crib (with clear ends;
community crib for evacuation
(with clear ends);
backsafe crib (with clear ends);
backsafe crib for evacuation
(with clear ends)
Również dla Community Playthings G257: Instrukcja obsługi produktu (4 strony)
Drukuj stronę
4
Press both top rails onto hinges.
Add second Crib End. Lean Crib End flat against Crib Sides.
5
Open assembly until square. Exposed
6
Add Crib Bottom. Insert latches into holes in uprights.
Crib End
These 2 casters unlocked.
symbol indicates mis-assembly.
First, insert these
two latches into
holes in uprights.
Adjusting the crib bottom:
To change bottom position, insert a key,
pen, or other small tool into slot as shown
and retract plungers on both ends.
To lower movable side, first lift up
on top rail, then squeeze triggers and
lower.
To raise movable side, lift up on top
rail until latches lock into position.
To change label, remove clear label
holder from rail and replace the paper
label as desired.
Disassembly of Crib:
1. Remove mattress and crib bottom.
2. Flatten crib by bringing the two sides
together.
3. Lift crib sides off ends.
5 5