DREAMVISION DreamWeaver II Podręcznik użytkownika - Strona 5
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Projektor DREAMVISION DreamWeaver II. DREAMVISION DreamWeaver II 13 stron. Digital cinema projector
Drukuj stronęModification of the page 19 of the User's Guide
Using the remote control
The remote uses two (2) provided batteries. They are easily installed by slid-
ing the cover off the remote's back, aligning the + and - ends of the batteries,
sliding them into place, and then replacing the cover.
To operate, point the remote at the projection screen or at the projector (not
at the video device). The optimum operation range is 0 to 30 feet (9.14m)
Press the remote's Menu button to open the projector's menu system. Use
the arrow buttons to navigate, and the Select button to select features and
adjust values in the menus. See page 21 for more info on the menus.
The remote also has:
Power On and Power Off buttons (see page 11 for shut down info)
Brightness + / -, contrast + / - buttons to adjust the image
Blank button to display a blank screen instead of the current image (see also
page 29)
Source 1, 2, 3, 4 buttons to switch among sources (to assign a particalur
source to a source button, see page 28)
Source select button which is a source toggle.
Native, 16:9, 4:3, Letterbox to have direct access to the main aspect ratio
Resize button to change the Aspect Ration (See also page 22)
Auto image button to resynch the projector to the source
Preset button to restaure stored settings (see page 24)
Overscan button to remove noise in a video image (page 24)
Freeze button, to freeze the displayed picture.
Key + and Key - buttons to adjust the keystone.
5