DREAMVISION DreamWeaver II Kullanıcı Kılavuzu - Sayfa 5

Projektör DREAMVISION DreamWeaver II için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DREAMVISION DreamWeaver II 13 sayfaları. Digital cinema projector

Sayfayı Yazdır

Modiﬁcation of the page 19 of the User's Guide

Using the remote control

The remote uses two (2) provided batteries. They are easily installed by slid-

ing the cover off the remote's back, aligning the + and - ends of the batteries,

sliding them into place, and then replacing the cover.

To operate, point the remote at the projection screen or at the projector (not

at the video device). The optimum operation range is 0 to 30 feet (9.14m)

Press the remote's Menu button to open the projector's menu system. Use

the arrow buttons to navigate, and the Select button to select features and

adjust values in the menus. See page 21 for more info on the menus.

The remote also has:

Power On and Power Off buttons (see page 11 for shut down info)

Brightness + / -, contrast + / - buttons to adjust the image

Blank button to display a blank screen instead of the current image (see also

page 29)

Source 1, 2, 3, 4 buttons to switch among sources (to assign a particalur

source to a source button, see page 28)

Source select button which is a source toggle.

Native, 16:9, 4:3, Letterbox to have direct access to the main aspect ratio

Resize button to change the Aspect Ration (See also page 22)

Auto image button to resynch the projector to the source

Preset button to restaure stored settings (see page 24)

Overscan button to remove noise in a video image (page 24)

Freeze button, to freeze the displayed picture.

Key + and Key - buttons to adjust the keystone.