Comnet RLMCSFPPOEHO Instrukcja instalacji i obsługi
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Konwerter mediów Comnet RLMCSFPPOEHO. Comnet RLMCSFPPOEHO 6 stron. Electrical substation-rated 10/100/1000 mbps ethernet media converter with optional high-output power over ethernet
Drukuj stronę
This manual serves the following
ComNet Model Numbers:
RLMCSFP24DC
RLMCSFP48DC
RLMCSFPHV
RLMCSFPPOEHO
INSTALLATION AND OPERATION MANUAL
RLMCSFP Series
Electrical Substation-Rated
10/100/1000 Mbps Ethernet Media Converter
with Optional High-Output Power over Ethernet
The ComNet RLMCSFP is designed for deployment in environments where high
levels of electromagnetic noise and interference (EMI) and severe voltage transients
and surges are routinely encountered.
The DIP-switch-selectable 100BASE-FX or 1000BASE-FX port supports conventional
CAT-5e/CAT-6 copper or optical transmission media by selection of the appropriate
ComNet SFP module.
User-selectable link fault pass-through provides remote indication of a network fault,
and a summary fault alarm provides a local or remote indication via Form C dry
contact closure in the event of loss of optical link or operating power.
The 10/100/1000BASE-TX port supports both auto-negotiation and automatic MDI/
MDI-X crossover for full and half-duplex operation; manual MDI/MDI-X switching is
not required.
The RLMCSFPPOEHO model additionally provides up to 60 Watts of Power over
Ethernet (PoE).
LED indicators confirm operational status.
See Figures 1 – 6 for complete operation details.
The RLMCSFP is DIN-rail or panel-mountable. See Figure A on the last page for
mounting instructions.
INS_RLMCSFP_REV–
Rev. 18 Sep 2020